Fluid Replacement

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by SureValla, Nov 15, 2010.

  1. SureValla

    SureValla Member

    Joined:
    Jul 13, 2007
    590
    21
    15
    Location:
    Shelton, CT
    Vehicle:
    2007 Prius
    Model:
    III
    I am about to hit 100k and I plan on doing the following:

    1) Transmission fluid
    2) Brake Fluid
    3) Engine/Inverter Fluid


    Any other suggestions?

    thanks
     
  2. SureValla

    SureValla Member

    Joined:
    Jul 13, 2007
    590
    21
    15
    Location:
    Shelton, CT
    Vehicle:
    2007 Prius
    Model:
    III
  3. jdenenberg

    jdenenberg EE Professor

    Joined:
    Nov 21, 2005
    3,910
    1,908
    1
    Location:
    Trumbull, CT
    Vehicle:
    2020 Prius
    Model:
    LE AWD-e
    1. PCV valve (a pain to get at)
    2. Serpentine belt (drives the engine water pump)
    3. Spark Plugs
    JeffD
     
  4. jreed

    jreed Member

    Joined:
    Mar 1, 2008
    84
    71
    0
    Location:
    North Carolina
    Vehicle:
    2006 Prius
    I recently got to 100K and I in addition to all of the items listed above (except the PCV valve) I replaced the inverter pump and the engine coolant pump. They're not very expensive and most of the time is spent refilling and bleeding the coolant out of the two systems. Check your engine coolant pump for weeping or leaking and replace it if it does. Once you put new coolant in the system (if it's like mine), you will notice more leaking. For the inverter pump, listen to it when you run the car with the ICE off -- if the pump is noisy or rattles, I'd replace it.
     
  5. jdenenberg

    jdenenberg EE Professor

    Joined:
    Nov 21, 2005
    3,910
    1,908
    1
    Location:
    Trumbull, CT
    Vehicle:
    2020 Prius
    Model:
    LE AWD-e
    I replaced these two pumps at 150,000 miles. My 2004 had the older (less reliable design) inverter pump, but the OP probably has the newer version in his 2007 so hopefully his is still good. Checking the engine water pump (mechanical) for leaks is a good idea.

    My dealer blew the task of getting out the air in the engine coolant loop so keep an eye on the engine temp at highway speeds (and coolant level in the overflow tank) after doing the work (adding more Toyota SSL coolant, the pink one, eliminated the overheating).

    JeffD