Washer Jets

If it's not powerful enough to spread water over the area that needs to be cleaned then it's not normal. I haven't taken a close look at the jets on my Prius C, but on older cars I used to use a pin to clean them out and aim them where I wanted them to spray.

 

Ditto, I use a very small sewing needle on my older car. No problem with the C yet.

 

Hi... not so on mine. It shouldn't be less powerful. Could be blocked, just do a visual check on both nozzles. The washer jet on Aqua is not adjustable so be very careful about using a pin or any other object. Try using the washer multiple times that might clear it.