P0121 - Throttle Body / TPS Sensor failure - Remedies?

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Mavi, Feb 14, 2017.

  1. Mavi

    Mavi Active Member

    Joined:
    Oct 12, 2015
    484
    285
    0
    Location:
    San Diego,ca
    Vehicle:
    2020 Prius Prime
    Model:
    XLE
    So I got a P0121 code which basically means the TPS sensor has gone bad, my car starting stalling, but not enough to stop, until at one point the engine shut off, the battery drained and I had to turn off the car and turn it back on after 10 minutes to get home very slowly.

    Is there anyway to just change the TPS sensor with something like this:
    NEW Genuine OEM Toyota Throttle Position Sensor 89452-35020 TPS Japan Made NIB | eBay
    or will I have to pick up a whole used throttle body system and change that out?

    Note: I did clean out the MAF and throttle body regularly with their own respective cleaners.

    Thanks
     
    #1 Mavi, Feb 14, 2017
  2. cyberpriusII

    cyberpriusII Prodigyplace says I'm Super Kris

    Joined:
    Oct 1, 2009
    1,147
    1,665
    0
    Location:
    Iowa
    Vehicle:
    2008 Prius
    Model:
    N/A
    The fount of all Prius Knowledge here -- other than me, of course --

    Patrick Wong says the TPS is not replaceable. You have to replace the whole thing....see this thread -- his post is #4.

    throttle position sensor | PriusChat
     
    #2 cyberpriusII, Feb 14, 2017
    Last edited: Feb 14, 2017
  3. Mavi

    Mavi Active Member

    Joined:
    Oct 12, 2015
    484
    285
    0
    Location:
    San Diego,ca
    Vehicle:
    2020 Prius Prime
    Model:
    XLE
    Perfect, searched around through googles search and couldn't find that thread. Thanks
     
    #3 Mavi, Feb 14, 2017
  4. JimboPalmer

    JimboPalmer Tsar of all the Rushers

    Joined:
    Apr 14, 2009
    12,470
    6,875
    2
    Location:
    Greenwood MS USA
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    "Does it hurt when you do that?" "Then don't do that!"

    There is no hint that Toyota recommends that
     
    #4 JimboPalmer, Feb 14, 2017
  5. Mavi

    Mavi Active Member

    Joined:
    Oct 12, 2015
    484
    285
    0
    Location:
    San Diego,ca
    Vehicle:
    2020 Prius Prime
    Model:
    XLE
    Issue fixed by picking up a used throttle body with tps and a gasket for ~$50 from ebay and swapping them out.
     
    #5 Mavi, Feb 19, 2017
    A.J. Tarnas and cyberpriusII like this.
  6. cyberpriusII

    cyberpriusII Prodigyplace says I'm Super Kris

    Joined:
    Oct 1, 2009
    1,147
    1,665
    0
    Location:
    Iowa
    Vehicle:
    2008 Prius
    Model:
    N/A
    Thanks for the UPDATE!!!
     
    #6 cyberpriusII, Feb 19, 2017
  7. 69shovlhed

    69shovlhed Surly tree hugger

    Joined:
    May 13, 2012
    2,170
    751
    0
    Location:
    Delaware
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    some folks recommend that to clean the throttle body, DON'T spray the cleaner into the throttle because it will get into the tps and damage it. instead spray a lint free cloth and wipe the crud out from around the throttle blade.
     
    #7 69shovlhed, Feb 19, 2017
    A.J. Tarnas likes this.
  8. Mavi

    Mavi Active Member

    Joined:
    Oct 12, 2015
    484
    285
    0
    Location:
    San Diego,ca
    Vehicle:
    2020 Prius Prime
    Model:
    XLE
    That's what I usually do. The car's last cleaning was like 15k miles ago and then randomly threw this code after cutting out in the highway. Just it's time to go im guessing.
     
    #8 Mavi, Feb 19, 2017
  9. Steven Parizeau

    Steven Parizeau New Member

    Joined:
    Dec 31, 2020
    4
    0
    0
    Location:
    Kauai, Hawaii
    Vehicle:
    2006 Prius
    Model:
    N/A
    Thanks for the update! I’m having this issue right now (9-10-2021).
    What was the part number of the replacement unit that you got?
    that link you posted brought me to Walmart search for “throttle body” just not sure which one you were referring to.
    How long did the replacement take?
    Thanks for the help so far!
     
    #9 Steven Parizeau, Sep 10, 2021
(You must log in or sign up to post here.)