Great, glad you figured it out and have it working. The gen2 custom PIDs didn't included the fan control PID (maybe in the future), you will have to add it manually (like everyone else). This link should help get you started : Scanguage command to turn on hv battery cooling fan | PriusChat
not sure I completely understand. in the torque custom PID menu, I added the following in the "start command" field: 00 00 07 e3 30 81 00 0n then changed it to 00 00 07 e3 30 81 00 6n for a fan speed of 6. what do I put in the stop command? is that is what's meant by "reply" or 00 00 07 eb 70 81? how do I even use this to toggle the fan?
doesn't let me put the fan on for anything less than 35 celcius. will adjusting the min temp to 30 make it run up to 30 and then from 35 on?
Not sure you read it completely, but here is a direct link to a single post in that thread. Hope it helps this time around. Scanguage command to turn on hv battery cooling fan | Page 2 | PriusChat For some reason I thought digesting two (2) pages of replies would be easier/quicker, but if you have the extra time or just feeling eager this thread is always worth perusing : Gen2 Prius: Custom PIDs for Torque (Android App) with formulas | PriusChat
