Hi. Anybody can help with information about connecting cruise control to ECU on Prius 50? Need find 2 pins CCS and ECCS.
Is yours an early car without Cruise Control? There was a thread a while ago regarding this: Adding cruise control to Prius 4 | PriusChat
If you’re trying to add cruise control to a car that wasn’t built with it, see these previous threads: Howdy Guys Cruise Control On A Prius | PriusChat Adding cruise switch to basic version | PriusChat The CCS terminal on the hybrid vehicle control ECU is F3-14. I don’t know of a terminal called ECCS; the ground connection for the cruise control switch, ECC, is from F21-2 to ground point FA, all shown in the Electronic Technical Manual from which the printout in your image “p6 (1).jpg” was taken. As I wrote previously, however, I don’t know if adding the switch and wiring is enough to enable cruise control on fourth-generation (ZVW5#) Prius cars, as it was on other models. If it works, please do let us know. I’m afraid there are very few exhaustive answers, mine included, in this forum. The people who could give such answers work for Toyota and its suppliers, and as far as I know, don’t post here.
Привет всем. Ловите решение Hi everybody. Catch the solution Three wires to pull from the brake pedal 5 pin, to the ECU block from the steering wheel connector, 1 pin to the ECU unit, 2 pins to the ground Tomorrow I will post a link with detailed diagrams, the newly registered does not give links to post immediately
correct the Internet address, the forum does not allow you to post it in a normal form. There are diagrams, and photos. not difficult
