Official Prius Gen3 Brake Torque Specs

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by andreimontreal, Nov 9, 2019.

  1. andreimontreal

    andreimontreal Active Member

    Joined:
    Jan 30, 2019
    346
    109
    28
    Location:
    Montreal
    Vehicle:
    2012 Prius
    Model:
    N/A
    Going crazy with finding all sorts of specs. I need those for the bracket, caliper, and banjo bolts.

    So far I gather 26 lbs for the sliding, 42 back and 101 front for bracket and 25 lbs for the banjo.

    EDIT from manual:

    rear 42 lbs bracket, 25 sliding pins, 25 banjo,
    front 101 brackets, 25 sliding and 25 banjo .... see bellow link to the entire repair manual

    Andrei
     
    #1 andreimontreal, Nov 9, 2019
    Last edited: Nov 9, 2019
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    111,598
    50,819
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    they're not in the service manual?
     
    #2 bisco, Nov 9, 2019
    andreimontreal likes this.
  3. andreimontreal

    andreimontreal Active Member

    Joined:
    Jan 30, 2019
    346
    109
    28
    Location:
    Montreal
    Vehicle:
    2012 Prius
    Model:
    N/A
    You mean the car's manual? Let me check.

    EDIT: silly me, I had the repair manual from the forum. I found it. Thanks Bisco - to my rescue as usual. Brakes start around page 878, look in the index.
     
    #3 andreimontreal, Nov 9, 2019
    Last edited: Nov 9, 2019
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    111,598
    50,819
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    no, the service manual. try the wiki page here for sources, or techinfo.toyota.com
     
    #4 bisco, Nov 9, 2019
  5. andreimontreal

    andreimontreal Active Member

    Joined:
    Jan 30, 2019
    346
    109
    28
    Location:
    Montreal
    Vehicle:
    2012 Prius
    Model:
    N/A
    Found it! Thanks Bisco. Was editing when you wrote.
     
    #5 andreimontreal, Nov 9, 2019
    bisco likes this.
  6. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    58,442
    40,245
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    I can post an excerpt tomorrow, just the brake section.
     
    #6 Mendel Leisk, Nov 10, 2019
  7. andreimontreal

    andreimontreal Active Member

    Joined:
    Jan 30, 2019
    346
    109
    28
    Location:
    Montreal
    Vehicle:
    2012 Prius
    Model:
    N/A
    If it's for me no need - check the edit. Thanks.
     
    #7 andreimontreal, Nov 10, 2019
    Mendel Leisk likes this.
  8. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    58,442
    40,245
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Anyhoo:
     

    Attached Files:

    #8 Mendel Leisk, Nov 10, 2019
    ehsieh, Keith Straw, Stephen Frost and 1 other person like this.
  9. Bob Mintus

    Bob Mintus New Member

    Joined:
    Mar 28, 2021
    4
    0
    0
    Location:
    Warren, OH
    Vehicle:
    2013 Prius
    Model:
    Two
    Thanks, all for the post Just decided to check my brakes before a vacation and found that my front inner pads were worn down to the metal and just lightly polishing the rotors. I can say that this is my first set of brakes (I bought it with 118K mi so I don't know for sure if this is the first or second set at 231K mi).

    I can tell a difference in the pedal travel. It's higher now. Going to go easy on these as they break in.
     
    #9 Bob Mintus, Jun 16, 2021
(You must log in or sign up to post here.)