2011 Prius IV Having Trouble Getting Air In / Breathing Can't Figure It Out

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Frank MM, May 16, 2025 at 1:55 PM.

Tags:
Page 2 of 2
  1. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    58,530
    40,303
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    The miles and when the first EGR cleaning occurred.
     
    #21 Mendel Leisk, May 19, 2025 at 8:20 AM
  2. rjparker

    rjparker Tu Humilde Sirviente

    Joined:
    Jun 6, 2008
    9,361
    5,716
    7
    Location:
    Texas Hill Country
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    Give all the credit to Mendel

    I have a feeling that the preemptive parts cannon exploded in the barrel causing collateral damage.

    About the only time a hybrid engine runs at idle after an initial two minute warmup is when the hybrid battery is discharged.

    Aftermarket egr valves are a different design than oem and are known to stick open. An egr should have no flow at idle and will cause the engine to run rough if it is sticking. If it is significantly open the engine may stall.

    Air leaks at the egr system gaskets or missing gaskets will also make it run rough.

    Aftermarket egr valves for these cars are a bad idea. Luckily there are no aftermarket egr coolers so if you bought a new one it must be oem. Hopefully the new "cooler" was not simply an egr pipe.
     
    #22 rjparker, May 19, 2025 at 7:07 PM
    Brian1954 likes this.
  3. Frank MM

    Frank MM Junior Member

    Joined:
    Nov 1, 2023
    15
    3
    0
    Location:
    NJ
    Vehicle:
    2011 Prius
    Model:
    Four
    I g ot a new EGR pipe and cooler. See my original post. That's exactly when the problem occurs. At idle when charging the hybrid battery.
     
    #23 Frank MM, May 20, 2025 at 2:46 AM
  4. Frank MM

    Frank MM Junior Member

    Joined:
    Nov 1, 2023
    15
    3
    0
    Location:
    NJ
    Vehicle:
    2011 Prius
    Model:
    Four
    #24 Frank MM, May 20, 2025 at 2:48 AM
  5. Frank MM

    Frank MM Junior Member

    Joined:
    Nov 1, 2023
    15
    3
    0
    Location:
    NJ
    Vehicle:
    2011 Prius
    Model:
    Four
    Oh good grief. I've been spending hours on Youtube trying to find another video like the one I just posted above. After I was about to give up for now in disgust I clicked on the description of the above video and the original poster of the video wrote that the problem was a bad EGR valve. DOH!

    Hmm, so I have the exact same sound. Could the new EGR valve I got be defective? Could that be it?

    I suppose it's possible in the sense that this problem didn't occur until after the new one was put on. Could a defective EGR make the engine go bonkers like mine is?

    It's a Delphi from Rock Auto. It's under a 12 month warranty so I just ordered a replacement and once I send back the old one they refund what I paid for this new one. Ok let's hope this is it.
     
    #25 Frank MM, May 20, 2025 at 4:05 AM
  6. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    7,048
    3,692
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    rockauto, that's your issue. cheap chinese copies....
    Get the EGR kit from Toyota.....

    rockauto has really gone down in quality to crap.

     
    #26 ASRDogman, May 20, 2025 at 7:05 AM
  7. rjparker

    rjparker Tu Humilde Sirviente

    Joined:
    Jun 6, 2008
    9,361
    5,716
    7
    Location:
    Texas Hill Country
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    Only an oem valve is reliable. Even then there is a revised Toyota part for 2010-12 Prii.

    Newer EGR Valve is 25620-37120
    Egr valve updated Kit 04004-58137

    Valve TSB Kit With Gaskets $154
    04004-58137 - Toyota Parts Deal

    Valve alone $302
    25620-37120 - Toyota Parts Deal

    Yes the kit is a far better deal and includes the valve.

    The egr valve tsb also referenced an updated ecu software "calibration id" that varies by year and model. It is recommended to have a dealer do this software update after the revised valve is installed. The ecu update offers many improvements and a similar tsb in the European market promised improved hg reliability due to water pump logic.
     
    #27 rjparker, May 20, 2025 at 7:26 AM
    Last edited: May 20, 2025 at 7:39 AM
    Brian1954 likes this.
(You must log in or sign up to post here.)
Page 2 of 2