Prius Prime SE Wheel Center Cover Cap

If it stays in that's all that matters. It'll definitely prevent rust-up. Pretty sure there's a Toyota centre cap. Are the 19" rims bare with a centre cap? That'd probably fit, and maybe more secure. For that I'd check with a dealership parts department; trying to use Toyota USA's parts site now is hopeless/

 

Part 42603-52170 seems to be the OEM center cap for every model and trim of Toyota since 2016

 

They're either 56mm or 60mm.
I guess you could measure with a Vernier gauge.

 

FWIW, the caps for my European non-factory Prius accessory 17" wheels were 42603-42170. But who's to say whether they're different, or if they were whether they'd be more likely to be a better fit for the factory 17" wheels.

Could just be a different colour (they're black).

 

The part number says this is for the 93-96 Camry?

 

According to? When I searched for the part number, main thing that showed up was the bZ4X.

(As mowgli suggested, there probably aren't a huge number of different cap parts in use.)

 

My mistake .....
Not enough posts yet to link.

Says the following -

Make/Model/Year:
Toyota Corolla 2017-2024
Toyota Prius 2016-2024
Toyota Yaris 2015-2020

Product Specifications:
Product ID: C75207
Product: Center Cap (Single)
Material: Plastic
Finish: Black With Chrome Emblem
Size: 2 1/8 Inch Diameter
OE Part Number: 42603-52170

 

Nicely done!

Any chance that you could share the CAD file? And any suggested resolution and infill percentage settings? What material did you print with? Thanks.

 

Any chance that you could share the CAD file, or maybe a link to where you found it? Much appreciated.

 

I bought and tried OE Part Number: 42603-52170 on my Prime SE 2024 - it falls right through!!
3D model would come in handy, specc.

 

Someone can maybe measure the hub opening inside diameter carefully with a caliper and post?

 

It's 60mm on the original 17" alloys.

 

Another factor is the groove location inside the bore, how far back it is from the front face. That’s crucial for the caps jaws to lock properly.

 

You're going to tease us like that and not post the file?

 

Any chance you could either post the file or charge me to print a set?

 

You can find Toyota center caps for Prius in STL file format for 3D printer. Per example, thingiverse site,
Toyota Prius/Corolla Center Wheel Caps #42603-52170

 

This model doesn't fit Gen5 Prius (2023-present)

 

42603-0E070, fits perfectly and snaps into the grooves. I paid 68$ taxes in from a Canadian dealership.

I hope this helps.