P0171 that came back

I had a P0171 code that I thought was the MAF sensor. After cleaning it with MAF cleaner, it still had the code. Checking the intake air temperature, I observed that the temperature appeared to skew higher, even when the engine was never run, the longer the MAF was powered on. Obviously bad IAT sensor on the MAF could cause the lean condition since the ECU would not know the correct air density, so I replaced it. The P0171 still returns intermittently however.

I've checked the MAP sensor values while running at idle and high RPMs and it always settles around 30-33 kPa, which my understanding suggests there's no leak. The fuel trim, however, is averaging close to 35% which seems really high. Should I smoke test for a vacuum leak, or figure out the rig to do the PITA fuel pressure test? Thank you.