Engine block heater how to bring out AC cord?

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by 2009Prius, Mar 28, 2010.

  1. 2009Prius

    2009Prius A Wimpy DIYer

    Joined:
    Mar 25, 2009
    2,705
    512
    63
    Location:
    USA
    Vehicle:
    2009 Prius
    I put the engine block heater in but have trouble bringing out the AC cord. The problem is that there is sold wall all around the condenser so I can't bring the cord from the engine compartment to the front grill. Please help. Thanks!
     
    #1 2009Prius, Mar 28, 2010
  2. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,500
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    I don't have experience with this. However if you remove the black plastic cover over the radiator, might you then be able to find a path for the cord to reach the front grille?
     
    #2 Patrick Wong, Mar 28, 2010
    1 person likes this.
  3. jpadc

    jpadc Type before I think too often

    Joined:
    Sep 9, 2008
    343
    34
    0
    Location:
    Indianapolis and Northern Wisconsin
    Vehicle:
    2017 Prius Alpha
    Model:
    Two
    Yes, you will need to take that off and then you will see that there is enough room to slide the plug over the wall but under the cross frame. then you can route it back down to the grill
     
    #3 jpadc, Mar 28, 2010
    1 person likes this.
  4. 2009Prius

    2009Prius A Wimpy DIYer

    Joined:
    Mar 25, 2009
    2,705
    512
    63
    Location:
    USA
    Vehicle:
    2009 Prius
    Yes I did remove the plastic cover but I was only looking down, not realizing there is a pathway high up. Thanks again!
     
    #4 2009Prius, Mar 29, 2010
(You must log in or sign up to post here.)