Check Hybrid System warning after installing BluLogic

Discussion in 'Gen 3 Prius Accessories and Modifications' started by bensmail, Feb 6, 2010.

  1. bensmail

    bensmail New Member

    Joined:
    Nov 24, 2009
    16
    5
    0
    Location:
    Maine
    Vehicle:
    2010 Prius
    Model:
    II
    I just installed BluLogic and now I have a Check Hybrid System warning.

    I'm guessing it's because I wanted to test the installation before putting everything back together and when I turned on the car it was giving me a warning that the park button was disconnected. But that's just a guess..... I left the headlights on a long time. Do you get that warning with a low battery?

    I tried idling the car for a few minutes and backed out of the garage but the message keeps popping back up along with the yellow triangle "!"

    Anyone know for sure if starting the car with the park switch disconnected will do this and will it clear on it's own?

    Thanks
     
    #1 bensmail, Feb 6, 2010
  2. spiderman

    spiderman wretched

    Joined:
    Jul 5, 2009
    7,543
    1,558
    0
    Location:
    Alaska
    Vehicle:
    2010 Prius
    Model:
    II
    Assuming nothing else is wrong, after the third full power on-off sequences, the error should disappear.
     
    #2 spiderman, Feb 6, 2010
  3. Clmchris

    Clmchris New Member

    Joined:
    Mar 1, 2011
    1
    0
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    II
    Did that fix it?
     
    #3 Clmchris, Mar 1, 2011
  4. bensmail

    bensmail New Member

    Joined:
    Nov 24, 2009
    16
    5
    0
    Location:
    Maine
    Vehicle:
    2010 Prius
    Model:
    II
    Yes, the message went away. It was caused by starting the car with the buttons disconnected.
     
    #4 bensmail, Mar 2, 2011
  5. RadioZero

    RadioZero Member

    Joined:
    Jun 20, 2009
    154
    59
    0
    Location:
    Orlando
    Vehicle:
    2018 Prius
    Model:
    Four
    had the same problem after installing a iPod adapter harness. pulled the dash apart and double checked all plugs including the ones around the shifter (just in case) and the warning went away.
     
    #5 RadioZero, Mar 5, 2011
(You must log in or sign up to post here.)