Remove interior personal main light switch module

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by edz, Feb 7, 2014.

  1. edz

    edz Junior Member

    Joined:
    May 25, 2009
    14
    5
    0
    Location:
    Long Beach, CA
    Vehicle:
    2010 Prius
    Model:
    IV
    I accidentally rotated the 5W light bulb base in this plastic module and the base disappeared above the module. So I need to remove the module to retrieve and reinstall the bulb base. I can't see any screw heads or any other holding tabs .
    I can pop off the plastic cover just forward (extends to the windshield edge) of the switch module, but this doesn't lead to the switch module ?
    Any help appreciated.
     
    #1 edz, Feb 7, 2014
  2. ny_rob

    ny_rob Senior Member

    Joined:
    Feb 28, 2012
    1,968
    813
    0
    Location:
    L.I.- NY
    Vehicle:
    Other Hybrid
    Model:
    N/A
    One guy here removed the map light cluster for some reason when switching over to interior LED lighting.
    Sorry I don't have the link- but he did have some photos there too.
    IIRC- the whole assembly comes out without any screws- it's held into the headliner with built in clips.
    I know it's not much help- but if you search through the Gen III "accessory" forum looking at the LED upgrade threads you should be able to see his post with photos.
     
    #2 ny_rob, Feb 8, 2014
(You must log in or sign up to post here.)