Post Engine Coolant Change - Cannister Pump?

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by sreese01, Aug 10, 2015.

  1. sreese01

    sreese01 Junior Member

    Joined:
    Oct 13, 2014
    15
    2
    0
    Vehicle:
    2008 Prius
    Model:
    II
    Hello,

    About a week ago I successfully changed my engine's coolant, but I've noticed as of late that the pump I normally hear running at turn off and on hasn't been making noise. I have no engine lights on and I assume if I had left it unplugged the system would have notified me? Thoughts?

    Edit:
    1. Clarification - the canister I have in mind is the one that stores engine coolant to keep it warm.
    2. The coolant change otherwise has been successful and I've driven 700+ miles without any other problem.
    3. The coolant reservoir (a different component) is working fine.

    Edit:

    CHRS W/P (Coolant heat recovery water pump).
    This is what I had in mind originally!
     
    #1 sreese01, Aug 10, 2015
    Last edited: Aug 11, 2015
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    111,604
    50,825
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    agreed. do you mean the brake accumulator when you open the drivers door?

    as a test, have you turned the heat on to make sure there's no air in the coolant?
     
    #2 bisco, Aug 10, 2015
  3. sreese01

    sreese01 Junior Member

    Joined:
    Oct 13, 2014
    15
    2
    0
    Vehicle:
    2008 Prius
    Model:
    II
    I'm regarding the canister that keeps the coolant warm. Normally at startup and shut down I was hearing a pump run to fill it. And I successfully burped the car as I've driven about 700 miles without the car overheating.
     
    #3 sreese01, Aug 11, 2015
  4. ILuvMyPriusToo

    ILuvMyPriusToo Senior Member

    Joined:
    Dec 4, 2014
    778
    514
    0
    Location:
    Outside Philly, PA
    Vehicle:
    2009 Prius
    Model:
    II
    It is supposed to be difficult to get all the air out after you drain and refill the coolant. (I haven't done it yet). Did the level drop and get topped off after you had done that driving?
     
    #4 ILuvMyPriusToo, Aug 11, 2015
  5. sreese01

    sreese01 Junior Member

    Joined:
    Oct 13, 2014
    15
    2
    0
    Vehicle:
    2008 Prius
    Model:
    II
    As I said, coolant change was successful and I have driven 700+ miles without an overheating or reservoir problem. The canister that keeps it warm and the pump that fills / unfills it hasn't been running. I do not have a check engine light on.
     
    #5 sreese01, Aug 11, 2015
(You must log in or sign up to post here.)