Just a quick DIY I attempted today. Since my armrest was already naked and without glue residue, I decided to buy some materials and fix it. Total cost to me was under $4.00. My wife had the power tac glue left over from her projects. I was going to pad it but decided it would raise the height and cost more. Lol. Everything can be bought at Joanne Fabric store. You need at least a 11"x18"( inch) piece to cover the armrest. I'll answer questions if anyone has any. Oh and total time was 1 hour including the drive to the store. SM-G935P ?
Nice job, thanks for sharing. Did you choose black vinyl as a preference? I've been able to color match and texture match other projects at Jo-Ann fabrics.
I shopped the discount isle and really didn't give much thought to it other than it will stay cleaner. Thanks for the kind words. SM-G935P ?
Not only cleaner, but will be more durable. I will need to replace mine soon. It's coming unglued. I may use vinyl as well.
There are 6 Phillips screws once you open the top door. Remove the two upper and 4 lowers will allow the cover to separate with a little pulling. SM-G935P ?
Thanks I've tried this in the past but was afraid to put too much pressure in separating the two halves.
I started with a 8x12 piece and trimmed to fit. It's a good diy project with some satisfying results. Enjoy. SM-G935P ?
Nice work. I re-padded the original fabric in our 05 several years ago. Still holding up perfectly. It's softer than the original, but I still wish I had used a denser padding material. I might just try your deluxe fix, too!
