hi everyone. have 2007 gen 2 with 189728 miles. red triangle blinks on sweeping radius turns ( exit from highway) code 1241 on my DOB2 any one has any idea what may be a reason for it. Thanks
Welcome to PriusChat!! It might be time to check the fluids (oil, etc) on your vehicle Here is the workup for DTC C1241 and C1242 : https://share.qclt.com/%E4%B8%B0%E7%94%B0%E6%99%AE%E7%91%9E%E6%96%AF%E5%8E%9F%E5%8E%82%E8%8B%B1%E6%96%87%E6%89%8B%E5%86%8Cpdf%E6%A0%BC%E5%BC%8F/Repair%20Manual/04pruisr/05/21avn/cic12414.pdf When was the last time the 12v battery was replaced?
k thanks, will work on testing the system in couple of days. let it warm up a little, freezing in new York York
If you have the light coming on when you are going around a turn, check the oil level NOW. Don’t even turn the engine on without checking it.
Hello again.. THANKS to everyone for help. I add oil right after conversation ( about 2 qt.) and clear code 1241, driving it since then for over 250 miles and so far no triangle and no C1241. will update post if any changes
And have you checked engine oil level again, after driving 250 miles? If not it would be good to do so, so that you can understand the extent to which the engine is consuming oil. You do not want to wait for warning lights to appear, before you decide to check the engine oil level. If you continue to allow the engine oil level to decline so much in the future, get ready to buy a new vehicle or pay to have a replacement engine installed.
