ABS actuator motor replaced teachstream software error air bleeding fail

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Bcmullen95, Jan 25, 2020.

  1. Bcmullen95

    Bcmullen95 New Member

    Joined:
    Jan 21, 2020
    3
    0
    0
    Location:
    85326
    Vehicle:
    2007 Prius
    Model:
    ----USA----
    Replaced the ABS pump with a used one. If the one I purchased has the same or more DTC codes, would this indicate it is a bad ABS pump. I have attempted to bleed using the techstream software, but I get Air bleeding fail. Any in for this or links to the info would be greatly appreciated.
     
    #1 Bcmullen95, Jan 25, 2020
  2. Bcmullen95

    Bcmullen95 New Member

    Joined:
    Jan 21, 2020
    3
    0
    0
    Location:
    85326
    Vehicle:
    2007 Prius
    Model:
    ----USA----
    I have realized I am having an issue with either the techstream software or the mini vci cable? Anyone had success with a mini vci cable for bleed ing the abs module after replacement?
     
    #2 Bcmullen95, Feb 2, 2020
  3. Sonic_TH

    Sonic_TH Active Member

    Joined:
    Mar 18, 2020
    568
    95
    7
    Location:
    Puerto Rico
    Vehicle:
    2016 Prius c
    Model:
    Two
    Have you tried doing it without techstream and see if it works?
     
    #3 Sonic_TH, Feb 14, 2021
  4. Elektroingenieur

    Elektroingenieur Senior Member

    Joined:
    Jan 8, 2017
    2,515
    3,275
    9
    Location:
    California
    Vehicle:
    2016 Prius
    Model:
    Three Touring
    You wouldn’t be the first person to report problems; see this thread about a later model, for example.
    The Repair Manual (more info) cautions specifically against this, since the bleeding will be incomplete.
     
    #4 Elektroingenieur, Feb 14, 2021
(You must log in or sign up to post here.)