Gen 2 Hybrid Battery Cover Tan Fasteners

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Tim Hardaway, Aug 8, 2021.

  1. Tim Hardaway

    Tim Hardaway Junior Member

    Joined:
    Aug 8, 2021
    4
    0
    3
    Location:
    Escondido
    Vehicle:
    2008 Prius
    Model:
    Two
    Hi everyone, first post on here. What a great resource!

    Thanks to the site, I successfully completed a cleaning of my hybrid battery cooling fan. When I was putting everything back together, I broke a couple of the white fasteners which connect the plastic cover on top of the hybrid battery pack. There is still one intact holding it in place.

    What is the name of these type of fasteners so I can go a-searching for replacements? They're not the black push pin variety.

    Here are a few pics for reference. The first is the fastener itself, all bunged up. Pics 2 and 3 with the arrows show where these fasteners connect the cover to the hybrid battery.

    Battery Cover Fasteners.jpg Battery Cover pic 1.png Battery Cover Pic 2.png

    Thanks in advance for help!
    -Tim
     
    #1 Tim Hardaway, Aug 8, 2021
  2. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,758
    8,562
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    #2 JC91006, Aug 8, 2021
    SFO and Raytheeagle like this.
  3. Tim Hardaway

    Tim Hardaway Junior Member

    Joined:
    Aug 8, 2021
    4
    0
    3
    Location:
    Escondido
    Vehicle:
    2008 Prius
    Model:
    Two
    My man! Thank you and perfect!

    "The ones you have actually look ok"
    I might try them again, but I don't think so. I tried to jam them in and they got crunched, hence the situation.
     
    #3 Tim Hardaway, Aug 8, 2021
  4. PriusCamper

    PriusCamper Senior Member

    Joined:
    Mar 3, 2012
    12,633
    5,107
    0
    Location:
    Pacific Northwest, USA
    Vehicle:
    2007 Prius
    Model:
    Two
    They are ridiculously expensive when you buy them per each... Best to buy in bulk and coordinate with someone on here who could use the extras, or vice versa. Here's the 146 piece box I usually buy for all things Toyota for $9: https://www.ebay.com/itm/203102107147
     
    #4 PriusCamper, Aug 8, 2021
    SFO likes this.
  5. SFO

    SFO Senior Member

    Joined:
    Feb 7, 2017
    5,302
    4,248
    0
    Location:
    Northern California
    Vehicle:
    2007 Prius
    Model:
    N/A
    Welcome to PriusChat!!
    If it doesn't work, you could always cover the holes with tape to prevent the forced air from escaping via the holes, which I've done before.
     
    #5 SFO, Aug 9, 2021
    Raytheeagle likes this.
(You must log in or sign up to post here.)