Gen 2 2008 prius front wheel Bearing

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by let's fix it, Apr 16, 2023.

  1. let's fix it

    let's fix it New Member

    Joined:
    Apr 16, 2023
    1
    0
    0
    Location:
    oregon
    Vehicle:
    2008 Prius
    Model:
    Touring
    My 2008 Prius is having wheel bearing noise. I have purchased the duralast gold wheel bearing hub assembly shown in the pic. i have seen some youtube videos, during the removal of the defective bearing I see people had to remove the retainer clip (snap ring) before removing the bearing and then they put it back after pressing the new bearing.
    As I have bearing assembly so I won't have to press the bearing first by itself.
    Now my question is how would I place the retainer clip if I have the bearing hub assembly? or for Gen 2 Prius there is no retainer clip for the wheel bearing hub assembly change?
    Thanks in advance
     

    Attached Files:

    #1 let's fix it, Apr 16, 2023
  2. dolj

    dolj Senior Member

    Joined:
    May 14, 2012
    8,187
    4,169
    0
    Location:
    Wellington, New Zealand
    Vehicle:
    2007 Prius
    Model:
    N/A
    Your picture shows a complete hub assembly, so there is no pressing out or pressing in bearings. You simply just remove your old hub assembly and install the new assembly.
     
    #2 dolj, Apr 16, 2023
  3. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    12,045
    2,131
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    Pressing and interference fits or for the old days That's gone now for most things You're installing an assembly essentially slides off and on Big nut goes out there to keep it all from sliding off while you're moving nothing much you need to do but make sure that nut is tight and all associated bolts that were removed are tight Don't even have to follow torque specs they just need to be tight these days
     
    #3 Tombukt2, Apr 16, 2023
  4. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    26,263
    17,197
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    ... where the exact meaning of "simply" depends on the amount of road salt used in your area.
     
    #4 ChapmanF, Apr 16, 2023
    Danno5060 likes this.
  5. Gino Veltri

    Gino Veltri Member

    Joined:
    Dec 25, 2020
    412
    40
    0
    Location:
    80521
    Vehicle:
    2005 Prius
    Model:
    ----USA----
    What this guy said. do the job yourself but be prepared to never look at your wheel the same again, if ye live in a rusty climate
     
    #5 Gino Veltri, May 12, 2023
(You must log in or sign up to post here.)