2016 Prius Braking power low warning

Did you ever have the 12v tested?

 

I test d the 12v was 12.2 v
Regardless I changed the battery 2 days ago. It's a new 12v battery now.
All eror and displays disappear after I'm turning the car on/ off several times. It is ok now.
I will try to replace the pump motor relay (c1253).

 

This post by Patrick might be worth a read . He has a njinja rep in this forum, even if he hasn't been around much lately.

abs main fuse | PriusChat

 

The post above was only a hint. Hinting that it could be in your best interest to get a 2 day sub to the repair manual, or try to get blink codes from the brake ECU.

 

My problem here is intermittent. Right now I don't have any dtc .
The fusible link is just an array of fuses. Not a relay.i might be wrong .
They sell it at the dealership for 30$.
I don't have any blown fuses now. And car functions 100%. But I do have a feeling this problem will come back because I only changed the battery which yet tested good (12.2v) but was 6 yrs old . when this abs failure happens it sudden and it takes 1 minutes for the car to be ok again after turning on/off several times . Yet very dangerous for me. I don't think problem is gone.

 

an uopdate
been now 300 miles and 8 days since i changed the 12v battery. car drives fine and all dtc codes disapear, is it time to be a little optimstic?

 

i am!