Engine bay fuse box

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Ed_1994, May 9, 2025 at 6:50 AM.

  1. Ed_1994

    Ed_1994 New Member

    Joined:
    Apr 30, 2025
    1
    0
    0
    Location:
    London, UK
    Vehicle:
    2011 Prius
    Model:
    Active


    After blowing the 125A fuse (don't ask), I've had to cut the two clips of the top cover that insert into the fender and have had to deform it to gain access to the fuse in order to replace. While it still clips onto the lower part and provides some protection, water can now easily access the fuses.

    I want to buy a new top part. My question is, how hard is it to reinstall? Removing the two clips and unclipping the other bits was extremely tough. Would I have an easier time reinstalling?
     
    #1 Ed_1994, May 9, 2025 at 6:50 AM
  2. MAX2

    MAX2 Senior Member

    Joined:
    Aug 12, 2024
    1,403
    454
    101
    Location:
    Third planet from the Sun
    Vehicle:
    2007 Prius
    Model:
    N/A
    Which part did you damage? The top cover or the bottom?

    Replacing the entire fuse box is quite a complicated procedure.

    Access to some of the fasteners and connectors is difficult.
    box fuse.jpg
     
    #2 MAX2, May 10, 2025 at 1:43 AM
(You must log in or sign up to post here.)