Unknown problem after some work i’ve done, please help

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by ToyotaCoyotta, May 15, 2025 at 9:04 PM.

Page 2 of 2
  1. ToyotaCoyotta

    ToyotaCoyotta New Member

    Joined:
    Dec 12, 2024
    16
    2
    0
    Location:
    Lithuania
    Vehicle:
    2006 Prius
    Model:
    Two
    im confused which one is it, because i took out one connector at the side and 4 bolts before removing throttle body
     
    #21 ToyotaCoyotta, May 16, 2025 at 3:44 PM
  2. ToyotaCoyotta

    ToyotaCoyotta New Member

    Joined:
    Dec 12, 2024
    16
    2
    0
    Location:
    Lithuania
    Vehicle:
    2006 Prius
    Model:
    Two
    Sorry I didnt understand what you meant
     
    #22 ToyotaCoyotta, May 16, 2025 at 3:45 PM
  3. ToyotaCoyotta

    ToyotaCoyotta New Member

    Joined:
    Dec 12, 2024
    16
    2
    0
    Location:
    Lithuania
    Vehicle:
    2006 Prius
    Model:
    Two
    Sorry But i didnt understans what you meant
     
    #23 ToyotaCoyotta, May 16, 2025 at 3:46 PM
  4. ToyotaCoyotta

    ToyotaCoyotta New Member

    Joined:
    Dec 12, 2024
    16
    2
    0
    Location:
    Lithuania
    Vehicle:
    2006 Prius
    Model:
    Two
    im confused which one is it, because i took out one connector at the side and 4 bolts before removing throttle body
     
    #24 ToyotaCoyotta, May 16, 2025 at 3:47 PM
  5. Brian1954

    Brian1954 Senior Member

    Joined:
    Jan 31, 2021
    1,638
    636
    0
    Location:
    South Central PA, USA
    Vehicle:
    2011 Prius
    Model:
    III
    Now I am confused. You have been talking about the EGR valve in this thread. You said you took the EGR valve apart, but you had herd that it was calibrated at the factory. I responded that the EGR valve is not calibrated at the factory, so there is no problem taking it apart.

    Are you now saying that you do not know the difference between the EGR valve and the throttle body? Take a picture of the part that you are taking apart and post it.
     
    #25 Brian1954, May 16, 2025 at 4:58 PM
(You must log in or sign up to post here.)
Page 2 of 2