2012 Prius C P148F code

Discussion in 'Prius c Care, Maintenance and Troubleshooting' started by JackE, Jul 7, 2025 at 6:23 PM.

  1. JackE

    JackE New Member

    Joined:
    Sunday
    4
    1
    0
    Location:
    North Carolina
    Vehicle:
    2012 Prius c
    Model:
    Three


    Yesterday when I was driving, I got the high temp (red thermometer) warning on my dash for about 3 seconds. When I scanned for engine codes, I got: P148F. What does this mean? Is it the inverter's water pump, or the engines? If I buy the parts, can I fix this myself?

    Thanks!
     
  2. JackE

    JackE New Member

    Joined:
    Sunday
    4
    1
    0
    Location:
    North Carolina
    Vehicle:
    2012 Prius c
    Model:
    Three
    Also, how do I check if my inverter water pump is working? Also also, should I replace the thermostat too?
     
  3. Brian1954

    Brian1954 Senior Member

    Joined:
    Jan 31, 2021
    1,780
    695
    0
    Location:
    South Central PA, USA
    Vehicle:
    2011 Prius
    Model:
    III
    What is the level of the engine coolant in the reservoir? If the level is between the minimum and maximum level, it is time to replace the pump.

    The P148F code is for the engine water pump. Replace it ASAP. A replacement OEM pump is preferred. Cheap aftermarket pumps only last a short time. You do not want to do this job twice.
     
  4. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    26,394
    17,296
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    P148F means the engine water pump is spinning faster than expected.

    Possible reasons could include that the plastic impeller has broken, so now it can spin without doing real work pumping water ... or that the coolant level is very low, so the pump can spin without real work pumping water.
     
    Brian1954 likes this.