Was driving a couple weeks ago and VCS, ABS and Brake lights came on along with a non-stop beeping. No longer had brake pressure. ABS Actuator was replaced a couple years back with a used one. Before I bite the bullet and get a new one from Toyota wanted to see what you guys thought. I couldn't read the codes using a code reader nor tech stream but these are the blink codes I got: C1243 C1245 C0206 C1236 C1242 C1311 C1313 C1210 C1241 C1242 C1244 C1252 Any suggestions?
a new one or if you're on a tight budget, gamble again on a used one. They're a common failure as they age.
im on my 3rd ABS actuator pump. the original one lasted 10 years, the toyota factory replacement only lasted 5 as they get to the point of failure, they start cycling alot. my toyota replacement pump was cycling (under hood rumbling every 5-10 seconds) about 450 times an hour per my counter info. now with new pump, its only cycling around 30-40 times an hour
when you replaced it with a used one, did you just plug and bleed or did you have to use the techstream software to set it up?
