Help...I need some advice with no start issue!

That's right it will not until you see the words or the letters r e a d y. On dash . When you do attempt to push the brake and push the button do you hear the relays clicking behind your head in the trunk it's pretty loud click click click or click click . Listen carefully . You will hear them or you will not it's important to note if you're getting the relays opening closing and opening back up again that has to do with readying vehicle .

 

it seems to me (and i could be wrong) that the engine not starting would not prevent the car from making 'ready'. that would be more of an electrical issue i think.
perhaps the hybrid battery level is too low from cranking the engine?

 

Clicking in the back of the car when you're trying to make ready do you hear the clicking those. You should be able to be ready even with a low hybrid battery it should attempt to do something it shouldn't lock you out

 

Try scanning for codes again.

What scanner are you using?

 

Right. The startup sequence is READY lights up first (and you can drive away if you want, under electric power, as soon as it does). The engine cranks a bit later if the car calls for it.

If the cranking is unsuccessful, some codes including P0A0F will eventually be logged and the triangle pops up. (I don't clearly remember whether the READY word goes out at that point, or the car just continues to say READY with the triangle showing, and won't go fast.)

 

[email protected] I'll send ya a bite of readying it's easier than posting vids and bites on the chat I think . see another Prius in town at the whole foods just walk up to the person and ask him to sit in the car and push the start button while you put your ear to driver quarter panel . Tell the other car owner you're not a weirdo you just wanna hear something . They'll be happy to do it.

 

If you hit the power button twice with no pedal you should get a full display.

 

Not fast.