I need to see backseat seatbelt trim

Hello, can anybody take a picture of what is missing here? There should be something there to block the seatbelt going in.

It should be something like 7 or 8 in the picture. So this is one of the things Toyota Woburn sold me without and I didnt see when I got the car. So I will design mine and 3d print.

I have 3d scanner too, if I had the part, I could scan and copy it but I have no idea what part or parts I need. If I could create 1-1 copy, I could share that digital file on Makerworld and everybody could use it.

 

Thanks for the photo. I could design something like this. It would be better if I had the piece temperorly so I can copy it, but I think I will just make something like that. Not sure the bottom of it and how its holding / look like. But I will try to design the way it hold good. It will be challenging. Lets see.

 

I did some test design and print but it's not good. I definitaly need that part so I can copy it. Otherwise creating that part from stratch would take too much time. I will pass this project untill I find that thing.