P3190 after cleaning intake manifold

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by KarolP, Mar 14, 2026 at 2:33 PM.

  1. KarolP

    KarolP New Member

    Joined:
    Yesterday
    1
    0
    0
    Location:
    Poland
    Vehicle:
    2010 Prius
    Model:
    III
    Hello everyone,

    After cleaning the intake manifold and assembling everything, I am getting error P3190 and check hybrid system. MAP shows a about 90kPA and after 10 seconds the engine shuts down.

    I've probably tried everything. I checked the hoses and plugs. I blinded all the holes, EGR, EVAP, etc. Continuously MAP 90kPA.

    When I cover throttle with my hand, the MAP dropped to 20-25 kPA and the engine also shut down after 10 seconds.

    Anyone have an idea what to do next?
     
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    114,624
    52,351
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    I’d go back and retrace all my steps
     
  3. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    114,624
    52,351
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    And your engine isn’t running, just spinning over.
    Be careful, you can easily kill the hybrid battery
     
  4. Mendel Leisk

    Mendel Leisk MMX GEN III

    Joined:
    Oct 17, 2010
    60,809
    41,865
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Check the PCV hose is connected intake manifold? That’s caught me.
     
  5. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    7,794
    3,976
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    Blinded all the holes????? (n)

    A very common, and easily missed, is the pcv hose to the intake manifold.
    It's hard to see as you put the intake manifold on.

    Did you change the pcv valved?