Separate names with a comma.
Bms data To day I drive 38km and it was the first day with zero error on the data send by my bms.:peace: This week I solve the main problem :...
38k
Thank you. Just for you, after crossing atlantic ocean, this become 150 Wh/km and 51km. 50F is 10°C :D Canview receive info from can bus. So we...
Mr plugin. Canview display only 6,57 Ah. I don't understand how it is possible, because your trip was 32 miles long ? 6,57Ah*230v=1511 Wh...
Flying What is bad for A123 cells is when there is some gas inside and then when they are not flat. They can be a little bend during...
Thank you mr plugin. Reading the celllog log. 1) Cell voltage goes down to "only" 2.95 v. Do you think it is because the battery temperature...
Yes, if you use A123 without tabs this is extremely important. We talked about this in this post When connecting two cells, the two aluminium...
Well. This bms, when connected to lithium, work very well during charging. It stops the charger, balancing is ok and I have a log on a pc....
Yes :D Good news. And did you have a look in the 9 logs in order to control if all voltages never have suddenly an impossible value. Your 9...
Nice. Did you done a test during driving. I ask this because hsd "sends" a lot of noise on HV wires. Thank you. Front and back are 12mm...
The internal cells resistance from nimh ecu was before the phev conversion. The cells dimensions that I gived where without tabs. I just mesure...
Tell us and take pictures :D The nimh ecu say between 0,021 and 0,024 ohms each. Total 0,304. When batt temp was 17°C. I done some test...
I don't know what bms+ does when voltage is over 240v during some time. Without lithium bms+ can quickly engage engine in compression mode,...
Third relay and 22ohms resistor are designed for charging some capacitor in the hsd convertor. You can have a huge amperage (very low resistance...
Couplage 226 244volts
Yes nimh is still connected. So if there is a serious problem on lithium side you can drive with just nimh. Just open the contactor. If the...
Several month ago i made a test drive with nimh and A123 cells. In this graph the speed is between 75 and 95 kph because the road was not flat....
75to95kph
You only need canview in order to send 210v end-voltage to bms+. This is not indispensable if you will not deplete the cells more then say...
Exactly. The bluetooth device never freeze. My computer is connected exactly like canview on the odb plug. So no freezing problem. It give the...
