Separate names with a comma.
Interesting. So, if you don't deplete A123 and your bms don't control all the cells, so you don't know if one could goes in overvoltage...
Thank you for the pictures. So you really did the first two seat 12.5+1.3 kWh Prius on the world :D Just a "few" questions. Where is the problem...
Nice. You are very close driving with all this equipement.:thumb: How will you connect the shunt to your computer. Will you have a very...
Re: Nimh Soc If even you do this, why not connect directly the 15 Nimh Ecu wires to Lithium cells. 5 cells between each wire ? 70 cells = 14 x...
Nimh Soc Yes, but. While I was waiting for bms+ to cross the ocean (I think the transporter waits until the wind blows in the right...
You can have a look here
This is not a opinion, this is what i use every day: 70 A123 is a good cell number. If using a buck dc-dc converter you can have more cells....
Exactly. And the second far behind the first and learned a long time ago.
Oh, "Clear answer" that's kind of you. You could use 16mm² (5 awg) everywhere. I use also 10mm² (8 awg) in my 5 sub-packs, but very short,...
Exactly like for // Nimh with nimh. One pole on one nimh contactor, battery side. For the second pole you have to add a small wire (15-20cm)...
Yes, but not specially when EV-switch is off. Bms+ always calculate SoC. Here is an example of Soc send by Bms+ to Hybrid Ecu during 20km....
Please contact Norman about this question. What I saw is that bms+ reduce ccl when voltage goes over, i think, 240-245v So When lithium is fully...
I first want insulation (high voltage inside :o) and to be able to have a look inside without opening boxes. But metal box would be fine also...
Hello, lopezjm2001 1) You have A123 20AH datasheet here So during 10sec 1kW per cell. Total 70kW, more then necessary. This would be more...
Hello, Mr-plugin. I have been using for one-two month bms+ and lithium cells in // with stock nimh and have a 2007 prius. It works very fine...
Hello, 2009Prius. For evap you can try these pid: 7e0 02 21 2E response=purge in byte 3 7e0 02 21 32 response=vapor pressure in byte 3...
Re: RPM as related to 15-18kw output. Sweet range. The graph i publish are with constant Soc and a 63% value, so there is no charge and no...
Re: RPM as related to 15-18kw output. Sweet range. Splendid graph. Probably net efficiency is in blue color and engine in red ? I suppose...
Hello, 2009prius. Yes on Canbus ice torque is received in two pid. -One passive (the lowest) -The other active. It is the one i use on my...
Yes there is a relationship between pedal position and kW on my chart. For exemple, in order to obtain 18kW press the pedal slowly to 34%. Test...
