Separate names with a comma.
This is the method I used for this bottom up refill. For whatever reason it left a lot of air in the heat storage tank but not elsewhere....
True, also not true. If the bladder wasn't there the evap system would be so much simpler (see the pix of the Japanese vs. USA tanks I posted...
I suspect the problem with pressurizing the bladder to expand it is that it can break some connection inside the tank. The bladder itself may or...
Hurt the metal? No. The paint, maybe. Part of what a hood liner does is to insulate the hood from the heat of the motor. My daughter grossly...
I did it that way too, with minor changes. There were about two quarts of air trapped in the CHS tank. That burped out easily with the "short...
The state government loves to create bureaucratic nightmares, so of course the implementations of our emission laws are thick with that. On the...
Last time I opened mine there was quite a bit of brake dust. They didn't look like your picture until after all of that was removed.
It is possible that the small CC may not be able to keep up with the evaporation from the Corolla tank in some circumstances. Like parked for...
Change the charcoal canister too? I've read that the one on the Prius is pretty small because the rubber bladder handles most of what the...
Prius Hard to Fill Fuel Tank – Diagnostic Network I don't have an account there, but it might be that the answer is available in one of the 3...
Compare and contrast, Japan vs. USA gas tank diagrams from Amayama (the year ranges overlap but are not identical): [ATTACH] [ATTACH] There are...
All sorts of plumbing/pressure/vacuum action going on in this system. I guess it follows that it isn't fully instrumented electronically....
Are there any DTCs on the OP's car? If not, is it known in what ways this system can fail so that the tank won't fill fully without setting one?...
I wonder in a situation like that if the rubber is just stiff or if there has been a leak and there are 6 gallons of gas between the bladder and...
I changed the ICE coolant on our car yesterday, refilling by putting fluid back in through the drain valve under the heat storage tank. (Siphoned...
No need to paint the fender liners, they are just black plastic. The cellulose (I think) on top of the liners is likely to be floating away at...
That is an EPA approved catalytic converter. NY is a CARB state. CARB approved catalytic converters are substantially more expensive. The one...
Found it. It wasn't on PriusChat but here starting on page 5:...
Tried this today using a slightly different method. Instead of poking the tube through the bottom of the bottle the tube was prefilled with...
The big metal can is the thermos bottle where the car stores hot coolant. There are some fairly fragile plastic bits on the bottom and the liner...
