Separate names with a comma.
Did you connect the MAF sensor wire? Many forget this and get a check engine light
I don't think you'll be breaking down anytime soon. Just drive it like you stole it. The rattle may be a 1 time occurrence. My 2010 burns a lot...
Yeah that engine coolant looks to have the wrong stuff in there, maybe DEXCOOL stuff. It should be pink like the inverter coolant reservoir.
I seem to have a similar AC issue with my 2008. There seems to be enough refrigerant in the car but the AC is not cold when it's extremely hot...
I don't think you connected the MAF sensor back when you put everything back together. Check for a dangling wire.
Now a deflatable pool
Well this is not good news at all. Besides the debris and acorns, there could be wiring damage to the car. Rodents usually will chew on the...
If you have cupping on the tires, it's worn/leaking shocks. Since 1 side is sitting lower than the other side, I would think you have a blown...
Maybe you just need the tires to be balanced?
If your spark plugs were wet when you removed them, any mechanic would be able to tell you it's not good news. Your car being a 2011 Prius, we...
That sound seems normal for the AC. If you haven't changed the transaxle fluid before, it would be a good time to change it. But the sounds...
I'm curious if hybrid pit will rebuild your motor if you bring it to them? It might be worthwhile to let the professionals rebuild it, you just...
It really comes down to how much you like the Gen 4 styling and the equipment in both cars. Gen 4 might be slightly better mechanically but 2015...
It would be almost a miracle at this point that the problem is not a failed head gasket. I would definitely try and clean out the EGR system and...
Car-Part.com--Used Auto Parts Market
The best solution is to buy a gen 4 engine and install it into a gen 3 car. Not all mechanics can do this, but the ones that can do it, this...
change the shifter
I'm still quite confused on how this head gasket could have failed at under 100k miles. Most of the reported failures are well close to 200k...
It's not a difficult job at all, if you have a torque wrench, you can do it. There are many videos online that will show you how to do it. Just...
It's only dangerous if you don't torque everything back correctly or install the brakes incorrectly. Suspension is very important in keeping you...