Separate names with a comma.
No tool experience, any experience with electrical equipment? If you were an EE major, or an electrician, even with no car repair experience...
Sam's Club isn't, unless they have changed recently.
Shorting two pins on a relay socket with an ohmmeter (there are more details than that to do it right) eventually pumps all the air out of the...
There are some issues with putting washers under a nut when tightening it https://www.boltscience.com/pages/why-use-washers.pdf In some cases...
Out of curiosity, has the OP been using something other than "top tier" gas? Interesting that 4 bottles of injector cleaner didn't help. Techron...
We definitely had air get into the system when we did our 3 way valve. Afterwards did the trick with an ohmmeter and the relay socket to pump...
Coolant doesn't fall out of solution or polymerize. At least, not that I have ever seen. Normally it doesn't get very dirty either. At one...
That is, well, very odd. The tank is a tank, hoses are hoses, the valve would be new. So what part is acting up to make it work less well?...
With the car cold and the tray out open the radiator cap and confirm that it is full. Low coolant can cause those codes. If the overflow was...
Is the OP certain that the threads in the receiving part are still good?
That would be the highest risk option. You have no idea who actually made those sticks and what their real expected lifetime is. I took that...
PriuSocal should start a new thread. Get the subcode for P0A90 too.
I believe there are some indications of that corrosion problem from some of the voltage readings one can get with Techstream or, I assume, the...
To do that they would have disconnected the 12V battery. Car loses all its settings and all of its tuning information. May run a bit rough until...
Why was it in the shop? I agree, have your friend post here directly.
If the OP's car does this consistently... Start the car. Wait 30 seconds (just a guess, 10 seconds might be enough) Pump the brakes a few times....
Here is one thread about that Corrosion/burn on Wire Frame No 2 Plug/Ecu | PriusChat The object being held in the hand in the pictures is the...
Verify that the OBD2 dongle works on another car. Inspect the OBD2 port connectors for corrosion or other physical damage. Did this OBD2 dongle...
First, you can probably ignore the HVAC error,that is probably the sun sensor which fails if the test is done in the shade. 12% vinegar? Pretty...
Shouldn't disconnecting the 12V be sufficient? The cells in the pack will self discharge the same whether the orange plug is in or not. The pack...
