Separate names with a comma.
He who does not check a fluid level which is easily checked after said fluid has been serviced will sooner or later wish that they had. Also do...
Another question, what exactly does "no oil and no coolant" mean? Because by the literal meaning the drive would have ended with a broken car on...
The OP may want to consult a lawyer before proceeding further because he may need to sue the person who did this work. Properly documenting the...
Yeah, Amazon reviews are always reliable. /s Amazon bundles reviews for different but related products. For all we know this review, even if...
Run the diagnostics? Hold Auto and R/F switches on steering while turning the car on, then there is a flow chart for the rest in the manual at...
Tombuk2 is correct, the foam door is right behind the glove box. The actuator on ours is working since that door opens and closes normally. It...
Yeah, "nobody" was too strong. Look through the forum and there are people who never got it to work, or did it 15 times before either giving up...
Thanks, will try that. Hopefully it moves. Looks like the air inlet servo is mounted above and to the left of the cabin filter, facing it from...
I noticed today that the cold air coming out of the end vents was at exactly the same temperature regardless of the setting for fresh...
If you can get to Wisconsin ericbecky on this forum does that sort of work. (I have read.)
Having an entry on a menu is a long long way from having a working brake bleed procedure. Many of us have the miniVCI with Techstream, and it...
Also the OP said that coolant is landing on spinning hardware and being flung all over the place. So "wet towel here" may not be particularly...
The endoscopes all (AFAIK) have built in LEDs for illumination. Most of the places they are poked into are dark.
OK. Maybe before recording data on a real test run a thin tube into the target area, close the hood, and drip a little coolant through the tube...
Another cheaper option would be to get a borescope/endoscope and run it into the engine compartment somehow. For an example of what I mean, go to...
With the motor off, and that tube attached to the bleed valve, attach a fluid transfer pump to that tube and pump outwards until fluid starts...
There may be air pockets in that coolant loop now, which would explain the lack of heat and possibly the odd temperature readings. This vehicle...
There are two cooling loops, one for the ICE and one for the inverter and transmission. They use the same type of coolant. If the car is losing...
But not the leak rate. Many types of vehicle leaks are at different rates depending on how hot the car is, how fast it is going, and so forth....
The true test for one of these sorts of devices is whether or not it can get all the way through the brake bleed procedure, or even do it at all....