Separate names with a comma.
IDK, a random car that popped up when I searched for hood scoops/vents. SM-S936U ?
Install the vents with the openings facing the rear of the car, the radiator fan blows front to back and the hot air rises naturally where it will...
Cut some holes in your hood and slap some scoops on the hood so the hot air in the engine bay can vent outside. [emoji6] Graphics optional....
Where do you think the radiator fans are forcing all the heat from the radiator? Into the engine bay, increasing your so called heat soak...
Other than moving the radiator out of the engine bay, OP is better served by ducting heat out of the engine bay, maybe with ducts and fans....
Did you properly connect the orange safety connector? You have to push it down until it clicks after rotating the lever up 90 degrees, many forget...
You say that the coolant is not the source of heat in the engine bay, it's the heat of the engine heating the air in the engine bay. Guess what...
A piece of double sided foam tape may work as well, depending on the size and weight of the ring. Plus, if you do manage to get the ring stuck...
10K oil change intervals are bad for engine longevity, especially in a 3rd Gen Prius with low tension oil rings. AMD, The Car Care Nut on YouTube...
Yeah, the Car Care Nut on YouTube has a video of a teardown of the entire dashboard assembly to get at something dropped down into the vent system...
I don't know if this will make a difference, but in the 2025 Toyota Crown Signia, both mirrors will tilt down when put in reverse if the selector...
I agree, jam a large screwdriver, breaker bar, or pry bar against the nut flat face to hopefully prevent it from turning. Also, do you have an...
Yes, it's not glue, it's lube to ease insertion of the string/plug. SM-S936U ?
Are these the original TPMS sensors? If so, then the battery or batteries are dead and you'll need new ones. SM-S936U ?
Lye is Sodium Hydroxide, or in chemical nomenclature NaOH. SM-S936U ?
Well, you probably have some missing fasteners, which are why the heatshield is vibrating/rattling around. You're going to have to get under the...
I've wired my foglights to turn on when the car is in Ready mode, they serve as DRLs during the day and foglights at night. It's wired up to a...
A lot of work, referred to sourcing the OEM stalk with the foglight switch and getting it properly wired. This is a sharp cutoff pattern on the...
Wasn't that for a Gen3 though? I don't think Morimoto makes LED foglights for the Gen2. Edit: NVM, just saw your post above. [emoji4] ...
Seems like a lot of work and expense to go through to install the crappy OEM style foglights. The OEM foglights have no cutoffs, they put out...
