Separate names with a comma.
Most people don't have the capability to replace the battery in a "sealed" TPMS sensor (and have it be reliable) - OR don't think it's worth the...
I would check the coolant level in the radiator (cold engine) - should be full. The level in the radiator external reservoir should be in the min...
Do any of the bidirectional tests for the ABS work? I have read about some people having problems with the VCI cable - they could "read" (view...
Ok, your water pump has failed. Replace it and the belt. It happens. While you're there I would replace the tensioner pulley and the engine...
Do you have a battery charger for the 12V? AFAIK, a weak 12V can prevent the bleed sequence from running. .
If you do anything online, buy from a "reputable" source - such as a Toyota dealer or maybe rockauto. There are lots of stories about counterfeit...
Turn the light switch on to the first detent (parking light position). Do any lights on the exterior illuminate? Turn the headlights on. Do any...
If you use the search function at the top of the screen, look for "flash codes". It describes a method to (carefully) jumper two terminals...
Read this thread that reviews several scantool apps and devices. https://priuschat.com/index.php?posts/3290690 The Autel AP200 can read codes and...
Car Scanner can only communicate with the ECM, hybrid control, and HV battery ecu's.
It's certainly possible that the body harness connector was damaged. If the connectors fit together enough that the sensor can work, then I would...
If you want to work on your car, then I would get a scantool like the Autel. It will let you see codes and data from all the ecu's on the car. It...
A multi-rib belt "squeaks" when the pulleys are out of alignment, or if the belt is slipping (due to being loose or contaminated with some type of...
So, I would turn the parking (tail) lights on, then use a 12V test light or a multimeter to see if you have 12V power present at the #16 TAIL fuse...
Lots of things can cause a P0171. Most common is dirty sensing elements in the MAF sensor. There's dedicated spray cleaner for that. Or brake...
I have always found the battery "gauge" and MPGs to be abnormal for awhile after disconnecting 12V power. Same was true after installing a new...
Why did you go after the busbars? Were you having problems before? If those blocks have voltages that are lower than the others on accel (by...
A number of years ago, McDonald's tried to standardize their "breakfast sandwich nomenclature". For awhile, the clerks would try to "correct" my...
For the moment, ignore the coolant valve codes. The position sensor inside the valve is bad. The fix is to install a new (OE) valve. This is a...
If you read the review thread that's linked in post 18, it mentions that Torque cannot get codes from most systems on a Gen2 Prius. It does show...
