Separate names with a comma.
If we had a few more we could start to do a list of normal ranges for a Prius. That way if someone has a problem we could just use the "nomal...
I suggest to you, if your up to the test is to put 85 in your Prius and do the mileage test and see if your mileage remains the same as 87 with no...
lower compression under high load and high compression under low load, it automatically strives to get the most power out of the engine under all...
monitoring the 12 volt system is like any other of the date feeds we get. If your 12 volt battery starts to lose capacity you only need to look at...
Henry good luck if your doing Dave's 12 volt update! That one I don't think I'd ever want to do. Soldering components to the actual SilLabs chip...
My guess is 69 when it's warm and 77 when it's a cold start. Is that correct?
well MG1 only has to spin to about 3600 RPM to get the ICE to 1000RPM so I'd think that mid 70's is probaby about right.
sorry I thought that you had a Ver.1 yup backup camera will work with a 2
thanks for posting them Daniel, that looked like fun.
The camera will not work with the version 1 of CAN-view as far as I know. But check with Norm to be sure.
Park them side by side outside when it's 30 below and then see who's driving who to work in the morning. Answer: you will be.
reflash it with the latest code even if you don't have the hardware installed yet. Also make sure that your DLC connector is install all the way...
So DAS you were probably right on the Pcode.
Johnathan turn the tunes back up and drive it. I think your listening to intently to the car and you really should ignore it for now and drive it....
OK, were screwed
first time I've seen it, man that's quite the "Kludge" as you put it. I used to think that vacuum readings really ment something but fuel flow is...
probably only 60% of the amperage required with a conventional starter on a Echo. So your reading it with an analog meter are you.
I know....arcane.........it's a question we all should know!
formatted screen as the MG1 amperage. The wifes car registers about 73-6 amps to start it up. How about some of you other users? What are you seeing?
it should be possibe to have many chargers hooked to the jump terminal. The only conceren is the current draw. If more than a few amps it would be...
