Separate names with a comma.
It's coming together guys! I'll post more news as soon as I know it, but looks like we're going to have something really soon!
This is the front antenna that lets the smartkey authorize start. Without it, you will not be able to start your car with the smartkey. I chose...
Here's TIS instructions:
Wow, this speaks volumes! It is actually *just* the antenna, not the oscillator and antenna as in the Gen2. The ground is not needed, only the 2...
Yes, I have done this. If you have a PHEV and can locate a plug, then the engine doesn't need to run at all! =) I made a plywood panel that...
Yes, the 300K odometer bug is only on the 2004 & 2005 CM boards. I can reprogram these to 0 or any other value if desired. You will have to file...
Not Relevant
Not relevant
I can repair this for you, and fix the design deficiency. See [this] post for info.
Understandable. Toyota's diagrams (and most others) are always viewed from the "business end" which means where the pins and sockets are, not the...
Yes, I have access. This is why I included the connector diagrams. Toyota uses the "ANT1/2" designation on the driver/passenger door module,...
Once you get the oscillator out, I'd love it if you could slide open it's housing and snap a few decent pictures of both sides of it's board. If...
I finally figured out what's causing this after being unable to reproduce in my 2008. I saw it on a friend's 2004. It's the clear plastic...
At least on the Gen II, the touch sensor (for unlock) has it's electronics built into the door handle, and simply asserts ground when it detects...
On the Gen II paralleling the oscillators do indeed work, as I have tested it for another project. However, on it, the oscillators have 3 wires,...
I would bet you lunch they have a different ECU. However, there is nothing preventing you from wiring the oscillators in parallel. Wire the...
Yes, apparently Toyota/Yazaki (the makers of the display), haven't learned much from their experience on the Gen II. I suspect this will be an...
It's perfectly safe to drive if you can get it going. You can also jump it if it refuses to go ready. Instructions are in the owners manual. Be...
Also [Here is] a list of all parameters that can be customized on a Gen III.
Ok, [Here is] all the relevant information I could dig up on the Gen III system. Looks pretty much the same as the Gen II in implementation, so...
