Separate names with a comma.
See my signature. I left out the rear TRD sway bar. Very red underneath my Prius!
Got my Tanabe front sway bar yesterday, and worked on installing it today. I used the Toyota repair manual posted elsewhere for the removal and...
I have the brace in the lower photo, but also have the Tanabe forward brace & Tanabe strut tower brace.
The camber may not be affected if the drop is moderate. I lowered my Integra with a Tokico kit less than 2", and I put in a camber adjustment...
My front-end alignment from the factory was slightly off in toe-in, but I don't recall exactly how much. Found this out after having the...
As far as I know, none of the mods people have done to their Prii have required cutting back the splash guards. You will have to remove the front...
Someone has posted a link here to a full shop manual for the 2010 Prius. It has the instructions you seek. Also look at the automatic headlights...
The shield under the engine probably makes a significant contribution to improving fuel efficiency. This is based on an article in Car & Driver...
My experience suggests that it doesn't matter how clean the surfaces are, double-sided adhesive tape doesn't stick well to the white plastic...
3M has red reflective tape for the proposed fix:...
No, we're referring to the mirrors themselves, not the covers. There's some white adhesive in the middle of the back that helps secure them to...
The 3M foam tape used for posters lasted about a week before letting the mirrors pop loose. The 3M auto trim tape (about half the thickness)...
Suspension mods won't either. I love the mods I've made, and a Tanabe front sway bar is on the way. The NF-210 springs give a medium drop and...
Mine took two dealer visits a few weeks ago. The first "fix" failed, the second succeeded, but I'll keep this bulletin in mind if/when the front...
From my trials with double-stick tape, it appears that (at least some) adhesives won't really bond to the black plastic material on the back of...
And now for something slightly different: my side mirrors won't stay fastened to the mounts. They were held on by clips plus a white adhesive in...
A further clarification: Turn signal blinker relays are sensitive to the current draw when the turn signal lights are on. When a regular bulb...
+1 on the tint, removal of plastic wheel covers & install center caps, front clear bra. Then there's all sorts of things, like fog lights,...
I sympathize, there's always a quirky aspect to a new car's maintenance. The oil filter cover wrench is one of the very few special tool issues...
A strap wrench won't work. The filter cover is too smooth, and you'll be highly challenged to generate 17 ft-lbs of torque needed. The correct...
