Separate names with a comma.
That is correct as shown on Norms website. CAN-view version 4
The Australian Prius also comes with factory fitted EV switch. I connected the Canview R1 across the EV button. The pin outs are only needed for...
Simple ICE kill switch at this link, one of many. No Squirt
My Canview has 6 relays. Canview relay 4 is dedicated for add-on packs. So I used relay 4 to switch a 12v relay to switch my 200amp contactor....
Hi FWD, What value of internal resistance are you getting on your Canview display with your new Lifepo4 battery pack connected?
Since I added two more A123 cells the Canview is showing a internal resistance of 0.06ohms most of the time. Xueming on EBay quotes these A123...
This is a link to how to do the Hall Effect Current sensor bypass: [ATTACH] Prius PHEV Schematics - EAA-PHEV [ATTACH] It was interesting...
The DIY of a A123 lithium pack using a BMSplus (or BMS2) is becoming cheaper by the day. I built one to overcome the bottleneck of having two...
Hi Planetaire, Have you already done the Elcon mod on your new charger?
There is a lot that goes on behind closed doors in the Enginer User's forum. You must own a Enginer kit to be in the users forum. If you are...
The black output wire to pin 1 bypasses the internal ground connection so that the transistor current 500mA (maximum) does not all go though the...
Mr Plugin designed his own setup based on the circuit design on this link: DIY Electric Car Forums
The CellLog has a transistor output, not a relay output. It can only handle a low current so you need to connect a relay as shown in the CellLog...
I am not aware of PIS having any drawbacks. What drawbacks are you referring to?
72 cells in // x 20ah = 1440ah @ 5amps charge = 288 hours = 12days from totally empty. That's a long wait.
I have added two more A123 cells today. Now using 72 x A123 cells. Drove home with 72 cells and with SoC at about 60% and nothing out of the...
Replacement of the OEM battery is a good ambition. pEEF actually replaced the OEM battery ECU with his own made battery ECU. He also built a...
EV Display unit from www.cleanautopower.com is what I am using. The Canview V4 from www.hybridinterfaces.ca can also be used to measure AH...
Welcome to the club. Good to see another member.
I have added a picture to show why heavier springs are added to the Prius when a PHEV kit of around 8kwh to 10kwh of batteries is added to a...
