Separate names with a comma.
Once your program decides to start the ICE you need to simulate 0348 warm up request (if ICE temperature is <45degC) which was previously blocked....
And charge it with a solar panel installed inside the back window.
Sounds good. Are you forbidden from showing us some photos? I am sure we would like to see your results.
Just did my install today. Being an electrician I thought it would have been a piece of cake. Not so. After the install it spoofed in reverse as...
The fact that you had to calibrate your CellLogs is not good. If they keep going out of calibration they can potentially damage your cells during...
I did not record the kilometres. It wouldn't mean much when you compare hilly terrain against the flat lands of the Netherlands.
You can buy the battery packs from Enginer Enginer | Prius Plugin PHEV Conversion Kit with Lithium-Ion | Hybrid for US900 each for LHS or RHS...
Thanks Thanks for doing the graph. I have been too busy to look into this. The cellLog photos were taken at battery pack depletion I pulled over...
I will be getting mine in the post soon. I plan to use my Canview V4 to collect the raw Canbus data and graph results and post them on this thread.
Here is the RFE 20ah spec sheet http://priuschat.com/attachments/rfe-f20-08180225-1-1-pdf.38819/ they can do max 2C. But you also need to look at...
I consider leggo cells which use copper busbars more prone to hot joints like those used by Mr Plugin. Pouch cells can have up to three nuts/bolts...
I keep my cells sealed inside tupperware containers with 14 cells and a centralised miniBMS board. Heat is not an issue. They need all the heat...
I have been using Hex Edit Neo program to filter raw data but free trial period has ran out. Does anybody know of a good free hex editor program?...
I am using 70 of those A123 pouch cells in series. They do not run hot at all. They have a small internal resistance. They were originally meant...
I did mine without tabs. It felt like I was one of those Chinese factory workers. It was a real PITA. Never again.
Option 1: Leave Enginer kit connected. It makes a good range extender with a Lifepo4 battery pack due to the flat voltage/SoC charge curve. Does...
Hi Bruce, Which version of Enginer kit do you have? Does it use the RFE battery packs?
According to my manual It appears that it is normally open across a resistor. I guess that it is triggered when the resistance dissapears due to...
