Separate names with a comma.
FWIW, I ran mine from the back on the driver's side up to the front. I've got the Toyota EBH. I used some nylon cable ties to secure the power...
Start using Shell or 76 gas for a few tank-fuls, keep using these if you can. Chevron has Premium won't harm anything, but it will have more...
You can look thru this thread: Interest in group buy for no-holes parking sensor | PriusChat I've installed the RF parking sensor in the...
The solar (panel) roof powers an interior ventilation fan that runs when the car is off. in sunny weather, it helps keep the interior at ambient...
I have the OEM Toyota heavy duty mats and they're in good shape still.
Get the cargo liner. It does a much better job protecting the area from spills. It won't compromise your battery. I'm at 40 k miles with one...
I ran into the same attitude at my local dealership. The Toyota dealership people in the parts department and service departments are amazingly...
You could install an oil pressure gauge if it was absolutely necessary for your peace-of-mind, but you'd have to get used to seeing zero pressure...
You could search this entire forum (all years) for a report of oil pressure loss and engine damage. I've never heard of this happening on a Prius.
New possibility: toe-in alignment is off, perhaps on one wheel. The crabbing it causes forces that tire to loose grip/regain grip/loose grip,...
95 mph in the mountains recently, very stable. For people who experience some instability at > highway speeds, even with the stock 15" tires,...
I wish someone could identify a part number for the standard Toyota Prius parking sensor kit. Parking sensors should be standard equipment in the...
I've got a vacuum bleeder and used it for the first time on my Chrysler minivan recently. Bubbles in the bleeder line during bleeding operation...
When I switch from low-rolling resistance tires to my snow tires (Blizzaks), I see a significant drop in mileage, like 10 - 20%. Be prepared for...
I moved the switch to a blank-off to the lower left of the steering wheel. I drilled a 1/2" starter hole in the blank-off with a wood drill, just...
Probably, try it with a rigged wire to ground then cover the sensor with a dark cloth. Wait at least 20 seconds after covering the sensor.
Others have managed to mount a 1/2" diameter switch into the blank-offs. The Proxel switch fits a 1/2"hole. I tried drilling out one with a 1/2"...
Here's what I heard back from Mario Del Signore (Proxel): the software has been modified in order to have just a sound that gives the risk of...
I finished my install today. The good news is that it does work, sensing and alarming when an object is about two inches from the front lip. I ran...
Installed parking sensor control module on underdash panel below the steering wheel.
