Separate names with a comma.
I don't have my user manual with me but from the online US manual, it is under the instrument panel on the left hand side (Driver side). Ours may...
1. Not only time-stamp, you can also logged with GPS coordinates, map or videos with PIDs overlay, etc. 2. Supposedly possible according to the...
Hi Florian , Most of them are correct except those I highlighted in blue. For battery voltages, there is a 100X factor in RXF, 03D5444105A4,...
How about a shorter ver., A - 128 * {A:7}? Vincent
I don't know if Torque can accept this syntax, someone has to try it. There is one other syntax for bit-wise operation, the "&" operator, e.g....
Thanks, after thinking over, I finally understand now. Vincent
I believe that e.g. is an 8-bit representation. For 16-bit, I agree with Bob to include B inside the brackets. For mathematical expressions, the...
Hi suland, I don't think there is a customize options for that setting. However, you can use Torque to display the units in metric on your H/P,...
Thanks for the heads up! I've moved them to a new worksheet under customize options and added warnings to the change log. Vincent
Torque has a function, SIGNED(), for this. e.g. (SIGNED(A)*256)+B)/8 Forums — » Torque OBD ECU Scanner » Torque Discussion...
No, ODO is showing the current trip MPG. It always reset to 0 at the start of a new trip. If you don't reset your TRIP A until your next refuel,...
I've played around with Techstream and there is 1 customize option that can be adjusted to match the display ambient temperature against the OAT....
You are right about the 1st byte of the header. ELM327 automatically determines the number of bytes that you are sending and inserts that length...
I wish there is one but no, there is none yet. There are numerous requests to the owner of Torque and he himself has said he is only good at...
Yes, that is correct. A is the 1st byte immediately after the responded PID. For ISO9141/KWP2000, it is usually the 6th byte (RXD=2808). However,...
What was the info shown? Others have did the same way using the TEST button. Could you select Seat Belt Beep Query to see what is the value...
Gen1 uses different protocol from Gen2 and Gen3 so the header is different. This is Gen1 OBD message format: [ATTACH] This is Gen2 and Gen3...
Did you leave the Disable all seatbelt beeps PID on the display screen? It only need to be run once and you should deselect it from the display...
Hi Jeff F, If the std PIDs are working, then it is possible to get the enhanced PIDs to work. You only have to change the header. Here is one...
Both should be about the same and you can use either one. Both the SOC are controlled to between 40% and 80% (the green region in the diagram...
