Separate names with a comma.
Warning, using a low quality ratchet type wrench, may risk damaging the ratcheting mechanism of said wrench due to the force needed to apply to...
Yeah, should be able to get one much cheaper at a salvage yard or from eBay. SCH-I535
Is it the headlight, or turn signal? You mention both. Either way, you probably need to replace the whole housing. SCH-I535
Why would you want to do that? It let's all the cool air out. :confused:
Everything I mentioned are all aftermarket parts. It will do you no good to mention it to a Toyota service representative. SCH-I535
Have you checked the simple things first? The fuse may have blown. SCH-I535
It's really tight. You will need a breaker bar or an impact gun to get it off. Then when reinstalling the new one, you have to be sure to tighten...
Weird, the date on your post is 1970. Yet you have a 2010... Lol. Better check out the Flux capacitors too. ;) SCH-I535
No recent work on it? Especially electrical? I got that error several times after doing some wiring behind the dash and probing around the fuse...
They should've checked the fluids, brake pads, and rotated the tires though, while they were resetting the maintenance reminder. ...
How much would this cost? SCH-I535
I guess it isn't green enough lol. SCH-I535
A 3mm spacer is required to clear the Gen3 caliper holders. SCH-I535
Ist Ihre Frau deutsch? :)
Now that you know where the speaker is, you could unplug it to disable it. Or, there are some other options: 1) Wire in a switch to manually...
I agree. They needed to make the rear window deflector so it covers the angled section at the rear of the window as well. However, that would...
That would be $850. ;) SCH-I535
I can't really see details of the derailleur in the pic. However, it looks like the gear cluster is on the wrong side of the wheel? ...
Small changes in the car's suspension geometry can affect stability. These can come from the chassis flexing, you might gain stability by...
That is interesting, let me know if you make any progress on getting an OEM DRL relay to work in a USDM spec Prius. SCH-I535