Separate names with a comma.
I saw one a few days ago as well. IMO, looks better in person than in pictures.
Doh! :D
Check, and reclose the hatch? Slam it shut pretty hard.
That's a beefy sway bar, is it solid or hollow? Guessing it's hollow from the appearance of it, and the low price.
Nice, congrats! Need to clear/recondition the headlight lenses?
+1 on checking the oil level. Suspicious that failure and strange engine noise before failure after oil change done at Walmart. Either severely...
Similar effect possible, mask off bumper and apply PlastiDip. ;) Or use carbon fiber style vinyl.
It is normal for the traction battery state of charge to rise and fall as you drive. It is also a known problem for the plastic shield that...
It's the mat that had the section popped inside out, not the gas pedal. There's nothing for Toyota service techs to look at. ;)
Here's my experience with installing shorter struts on our 2011 when one strut gave out: Hatchback hitting garage door solution! | Page 3 | PriusChat
This is for gen 3, but the solution is the same, install shorter struts: Hatchback hitting garage door solution! | PriusChat
I ran H9 bulbs in both of my cars for over a year before switching to HIDs (blocked the squirrel finder cutouts). No problems with the H9 bulbs in...
No, the bolt pattern is different. 5 x 100mm vs 5 x 114.3mm
Are they related to one system or component? Maybe they're not so random, and are forshadowing a potential problem?
Are you using LED bulbs with a vertical circuit board between two bright LEDs? If so, that circuit board is probably what's causing the shadow.
If you have a multimeter, you can test the switch contacts for continuity with the switch in both On and Off positions. It sounds like you have...
Here is the sticky thread for the priuschat oem foglight kit for the gen 3 hatchback. There is a link in the first post to the instructions, where...
Alternatively, after removing the battery, the fob should be thoroughly rinsed off with distilled water to remove any remaining detergent. Shake...
You need to source or buy the lower grill with foglight openings. You'll also need to get an oem type foglight kit (foglights, wiring harness,...
Probably easiest to look from below, there's usually a removable cover under the corners.
