Separate names with a comma.
when I upgraded the speakers in my '04, I went to parts express. the drivers they sell aren't name brands that you'd see in a store or catalog,...
I can't understand why you'd deliberately make your tires hit the fender. you can see its chewing up your tires. tail lights look good tho.
unfortunately, the amp and head unit work as a pair; if you replace the amp, you must replace the head unit and re-wire it all. upgrading the...
I didn't lose the illumination in my'04 when I installed the kenwood, you should be ok.
they do just pull off, but watch the dash disassembly video on youtube before you go for it. there are a few wires and screws you got to be...
the problem with all this rewiring is that you'd have to just about gut the car to do it, and spend $1000+ to make it worth the effort. if you...
I hate acronyms...
that's a personal preference thing. set it where you think it sounds good.
for the rear speakers, the woofers and tweeters are in parallel, which means if you splice into the rear speaker wires you are going to need to...
I wouldn't trust a welded wheel. I've seen several that were welded, and cracked again, right next to the weld.
valde is right. swap the relays to verify that they are both good. if it works in reverse with the relays swapped, then the switch is definitely...
yes, the high level inputs are speaker inputs you can just splice into the speaker wires. that's probably the easiest way to do it. using the line...
Wth is a LOC?
you got a 60w light and a 5a fuse? 12V x 5A = 60W. you might try a 7.5A fuse
the belt is very easy to replace, and it is possible you can push the new belt on without even having to adjust the tensioner. do not drive...
if the gasket is still leaking, you've either nicked the pump somehow, or the engine when you scraped off the old gasket, or you missed a bit of...
sounds like the 5 mechanics aren't competent about prii, even if they are competent in other cars. or maybe they just talk a good game, but aren't...
when cv axles go bad, they rattle while turning. a clunk is more likely from a bad motor mount, although someone had a counter weight break off...
I doubt its a cv joint. sounds like something is wrong with the trans axle, or possibly the shifter. sounds like its going into the B position,...
when you say "high level input" you mean there are screw terminals and not jacks for the input? if so, then yes, you can just splice into the...
