Separate names with a comma.
I suggest you consider replacing the ball joint with the broken rubber cover soon, as the grease will eventually leak out and cause the joint to...
Yes, and I would say it is likely that regular oil was used considering the price (neither synthetic nor semi-synthetic.) Here is the Mobil 1...
If the dealer is using Mobil 1, that is full synthetic engine oil. It would be a great idea for you to start checking the oil level periodically...
I suggest you find a local shop that refurbishes wheels, and see if they can help by removing the wheels, sand blasting them to remove corrosion,...
I'm wondering whether it would be reasonable to use RTV sealant for this purpose. For example, the Toyota sealant used to seal the spark plug...
I agree. I believe the Erasure mode is just related to erasing the fobs from the Smart ECU. However, I haven't needed to do this work, so I...
I think you will have to remove existing fobs and then add the fobs you own.
After you swap the Smart ECU, there is a long process that you need to follow, using Techstream, so that the ECU registers the Smart fobs that you...
Make sure that all battery cables are secure including the negative cable where it bolts to the body. Measure voltage across the 12V battery when...
Right
eBay or a local source would be good. Another possibility would be for you to seek professional assistance from your local dealer to see what the...
[ATTACH]
No, you were on a reasonable path and since you determined the compressor had physical damage, it needed to be replaced.
I don't know, see if you can retrieve any DTC related to the air conditioning system. Well, you would have to expose the three-phase AC wiring...
1. This is my understanding of the work you have done so far: You replaced the compressor, condenser, dryer. 2. You did not replace the...
I think you should see if the AC compressor will run now.
Please take a photo of this warning and post. Also, check the tightness of the 12V battery cables, including the negative cable where it attaches...
There are at least nine different diagnostic trouble codes which relate to the fuel tank. "Venting" does not necessary imply that liquid fuel is...
Yes, since I am doing this work myself I frequently don't have someone to depress the brake pedal; hence use the impact wrench to loosen the nut....
1. Check ABS-1 and ABS-2 fuses. 2. There is one wire to check continuity between the skid control ECU and the brake actuator. Then check that...
