Separate names with a comma.
So, I have a genuine Denso SK16R11 sparkplug rated for 100k miles. For whatever reason, I remove it after 5k miles, clean it and put in on the...
Everyone's life situation is different. Only you can answer the question of whether it's worth repairing to you. If someone is happy with the car...
hmmmmm....one thing you have to recognize is the HF torque wrenches, regardless of what they say, are NOT 'click' style wrenches. They do not make...
What's your location? Sorry to hear about the theft. If you're not in a CA emission state, you can replace it with a $120 cat assembly and be good...
I have a drill press and wondered about the drilling out option. Wasn't sure if standard rosin-core solder could handle the current and...
I can't make out the voltage readings on the chart. Can you write them out for each block? Just for the chart with the + and - red lines Are they...
If you can, remove the covers, take several photos of the harness side of the battery, top of the battery and electronics section. Post them....
What are the chances the modules are installed backwards, polarity-wise? The module furthest from the ecu should have its negative terminal...
That filter does nothing significant on a Gen2. The air supply is drawn from the end of that duct, unfiltered, straight from the passenger side of...
Moving the modules from one area of the pack to another will change nothing. A module cannot just flip its voltage. Your problem is the sensing...
But, I should add, the batteries I've pulled apart that had nickel plated busbars have been significantly more free of corrosion than the standard...
Couple things here. You need to check whatever tool you were using for torqueing. There's no way a true 60 inch pounds (5 ft-lb) should snap one...
I've found it's easier and quicker to just replace that harness(wire frame #2) with a new one. About $50 from Toyota and it eliminates all the...
There's a pretty significant construction difference between a true "deep cycle" battery and a "starting" battery and they both have their own...
The P0A1D has dozens of subcodes, but they're mostly triggered by an internal malfunction of the HV ECU. A reasonable question to ask is whether...
My recommendation for anyone replacing an MFD is to remove the current one to get the model number that's printed on the back. Purchase the exact...
To make life a bit easier: 2012 Toyota Prius II - cars & trucks - by owner - vehicle automotive...
1.1 mm which is 0.043" I'm pretty sure the 1.0 mm (0.039") is within spec. DensoProducts.com: SK16R11 $7.69 Denso 3324 Iridium Spark Plug - Best...
The Gen1 module thing is a bit overblown. Does it give the initial impression of being BS? Yes. Is it really? Not necessarily. The photos in this...
The last P0A0F-204 I worked on, ended up being the throttle body. Pull the MAF sensor out of it, clean both the MAF and the TB really well, verify...
