Separate names with a comma.
Heres a view of the Amplifier rack and the two mini Audiocontrol amps and the Audiocontrol DM-608 Digital Signal processor that is used to get the...
The power wire is also a short length of 4ga KnuKoncepts Kolossus Fleks Blue power cable run from the battery to the KnuKoncepts basic power...
Power and ground wiring for the Amp rack was straight forward. A small length of 4 ga. Black KnuKoncepts Kolossus Fleks power wire was run from...
And that brings us to the last item of the installation project...The amp rack and equipment. The amp rack itself is made from a 1/2" thick sheet...
[ATTACH] [ATTACH] [ATTACH] Sub Enclosure cont... The NVX sub enclosure is model # NVX BOOST BE_TOY-PRIG3 NW 104V2. The 104V2 part of the model #...
Lastly ...the sub woofer. A great deal of consideration went into the subwoofer. Both location and construction of the enclosure. While searching...
Front tweeters for the 3 - way sound stage. I originally wanted to install the front tweeters in the front sail panels close to the mid range...
OK ...Tweeters. For the rear doors I simply installed the Focal tweeters in the stock upper door locations. I used a Metal 4" electrical box cover...
I need to make 2 corrections about this build. The first one is about the year of the project vehicle. My very first post mistakenly states that...
After seeing the black speaker cloth installed over the stock front dash tweeter grills which now house the 4" mid range speakers back in the car,...
The next issue was how to get the sound from the 4" Mid Range speaker thru the 2" hole in the plastic factory dash speaker grill. Time for another...
Upgrading the Factory Front Dash Tweeters to 4" Midrange speakers. Many on the chat have upgraded their front Dash tweeters to 3" or even 3.5"...
[ATTACH] The PVC I used to fabricate the Speaker rings was originally White in color put I sprayed them semi-gloss Black with Rustoleum spray...
Now that the door cards fit correctly and all the wiring was done it was time for speaker installation. As you may know , the front door speakers...
I noticed that when I went to re attach the door panels that the tolerances were so close that the 1/2" Soundskins Pro was holding the panel out...
I wanted to mention that you should also do some sound treating on the door cards as well. Just some extra scraps from the Kilmat or even...
Tying into the factory amp. This phase was pretty straightforward. I used 18 ga. - 9 strand Speedwire to marry the factory JVC amp to my new...
Wiring. The next phase was running all the wiring. The rear doors are a two way component system each with a separate woofer and tweeter [ATTACH]...
Then it was a matter of carefully placing the Soundskind Pro onto each inner door panel and reattaching the wiring harnesses. You can see in the...
Then just lay out a piece of the Soundskins Pro and tape the clear plastic to the sound treatment again using the blue painters tape. The Blue...
