Separate names with a comma.
Lol, famous last words. [emoji12] .
Nice! I'd argue that 1/2 inch threaded rods are overkill though. 3/8 inch threaded rod should be more than enough to hold them securely together...
The oil catch can goes between the PCV valve and the intake manifold, not the EGR valve and the intake manifold. Posted via the PriusChat mobile...
This OCC is the one with the sintered brass filter? Be careful with that, it can be too restrictive to air flow, especially when the filter gets...
I'm with State Farm as well. Bought our own cat shield out of pocket and installed it myself. Additionally, I put some extra stainless steel wire...
That's like asking them if they'll pay for installing an aftermarket alarm system. Not gonna happen. .
40 mpg is not great, our 2011 gets 50 mpg. Did you stop at the EGR tube? The EGR cooler and EGR valve might be fouled up as well. Posted via...
Did you leave the EGR valve connector unplugged? Maybe the valve is partially open? .
Here's the EGR valve, EGR cooler, and EGR pipe on our 2011 when it had 124,500 miles. Additionally, the EGR passages in the intake manifold were...
The engine seems to be running at lower rpm now at highway speed, especially noticeable going up a hill to and from my route to work. I'll know...
I don't think it's my imagination, but it seems that there's more power on tap in the Corolla. The last Fuelly monitored mpg was 38.x which is a...
I always thought that the v should have had the larger 4 cylinder engine from the Camry hybrid, since it's curb weight was 300 lbs heavier than...
Added stainless steel potscrubber material to my OCC in the Corolla today. The fine mesh material has been in the car for only 3 days and it's...
It happens a lot when people get too close to a curb. Hence the term curbed or curbing the wheel. .
Unfortunately, you have to source an entire headlight housing assembly. New or used. .
I have in the past, but he always refuses payment. I feel bad about that and I don't want to take advantage of his generosity. I know how hard it...
I'm also considering installing a modified air/oil separator after the OCC. I've replaced the sintered brass restrictive filter with rolled up...
Yes, I've seen illustrations like that. My thinking is that most, if not all the oil is in vapor/small droplet form, carried by a warm/hot air...
Yes, bright and blinding, especially SUVs and trucks that are pretty high. I think the especially blinding ones are running 55w HIDs instead of...
For me, the OCC would be very tight behind the headlight. Plus, I need easy access to the headlights. I have HIDs installed, and I need to remove...
