Separate names with a comma.
I got into new screens. The red light in the OBD clear shell has always been red. It never changed to green. Here are the new screens.
So, maybe my problem is that I need drivers for the cable? Are there drivers for the cable? The cable is a "MINI-VCI J2534 Standard OBDII...
I just found out that I get the same thing with the USB cable unplugged from laptop. And I did get other screens after the other (first) one. But...
I bought a cheap cable and CD on ebay. The CD did not work, but I found Techstream software with Oracle VM and Acrinis True Image on the web. The...
Rattle when turning off engine I have a P0401 code. No tags on car-unable to drive. I cleaned the IM, EGR valve, pipes and cooler. I also...
I had a similiar experience. I put a cork in one end and filled it with carb cleaner, brake cleaner, and oven cleaner. Each was allowed to soak...
Enging banging when turning ICE off. Maybe I should start a new thread, but my problem is close. I get the P0401 code and have cleaned the IM, EGR...
The bracket only supported a wire harness. I worried that it supported the pump. I installed the bracket in one hour. The screws were left at the...
ASRDogman-Thanks. I found the bracket in an illustrated parts breakdown. It looks like it attaches to the booster pump and maybe the master...
Thank you. I will do that. I am embarressed to write that there are also 3 screws that are left over. (81 years old and senilel) They do not have...
I could not see any unsupported wire clips nor places to bolt the bracket down under the metal cowl. I watched 2 videos of replacing the spark...
Sorry. I did want to stay on topic. It started as "P0A80 code-but is it really the hybrid battery". I thought my battery was bad. But since my...
2010 Prius update: I bought the new, improved brake booster pump and master cyclinder--$1200 and installed them. I read that to bleed the brakes,...
I removed the intake manifold, EGR valve and cooler, brake booster pump, master cylinder, and traction battery. The bracket came from one of those...
I could find no chemical that really worked well. I soaked it for a week with oven cleaner, carb cleaner and brake cleaner. My cooler was so...
I decided to drop the sensor into the hole in the sheet metal. Gravity might keep it there. I could find no way to lock it into place.
I spent 2 weeks reconditioning my traction battery. The triangle light was on and "Check Hybrid system" message was on. I cycled discharge/charge...
I removed the temp sensors to recondition the battery modules. I cannot remember where one of the 4 sensors goes. It is the one closest to the...
