Separate names with a comma.
No actual data, but I was told this is why the aftermarket ones suck so bad.
[IMG] Is this part absolutely needed? I know the brake dust shields rot away in salt land and people run them without them fine. Supposedly...
I hate how all bearings besides the OEM are made in China now. Ordered a "F@G" brand (actual name, German company), and returned it because the...
All new timing components, chain, tensioner, guides, sprockets, etc.
So from reading on here, I've seen a post where the ECU can set this code when in reality it meant to set codes P0011 or P0012. The engine was...
Bottom mounds installed. I used stainless hardware. [IMG] [IMG] Upon removing what was left of the old fan switch, the pins were still in the...
Here is the site I used: 2003 - 2009 Toyota PRIUS NHW20 OEM Parts | U.S.A. sales region, , 917612 A site a regular consumer might use: Select...
Here are pics of the clip nuts for mounting the radiator to the radiator mounts. Part# 1649320310 Washer - Plate Radiator [IMG] [IMG] Here they...
There seems to be two parts store versions, one for the consumer that doesn't show as many parts, and ones for techs that do.
A lot of online Toyota part sites only show this: [IMG] I found this: [IMG] Here are the part numbers. The 8 bolts that hold the individual rad...
The 1.5 Engine used in the Prius C is pretty much a Gen 2 engine with some changes, but the intake manifold itself will bolt right up. The...
Too rusted out to use.
Replacing the old one, the new one does not any hardware to hold it together. There should be two nuts installed on the top and bottom to hold it...
I have techstream, but I have a Win11 laptop and can't seem to get it to work on it.
Personally I think the entire Gen 2 throttle body design is goofy as hell. Why? The throttle body in a Gen2 Prius is pretty much the same...
PM sent,
I replaced my radiator and accidentally broke the old one. Both coolant sensors are under $10 at Rockauto. The fan switch is $75! It looks...
Also noticed the engine is MUCH louder in drive than it is in park, and that is with my foot on the brake.
Took the actuator out, tested it with a power supply. Works good. Checked the little filter for it, no issue. Put it all back together and the...
All new motor mounts. Nothing visibly moving. PXL_20241007_175756668.mp4 It almost sounds like axle shafts, but those shouldn't move at all in...
